Wood sawn or chipped lengthwise — HS code 44.07

Wood sawn or chipped lengthwise — HS code 44.07. 4407.11 coniferous species, of pine (Pinus spp.)… · 4407.12 coniferous species, of fir (Abies spp.) and…

Source: Turkish Ministry of Trade — Turkish Customs Tariff Schedule (TGTC), 2026 edition. Data last updated: . Compiled from the official schedule for information only. Binding tariff information is issued by the customs administration.

What this heading covers

Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mm

The first six digits are the same in every country that applies the Harmonized System; the twelve-digit breakdown below them is specific to Türkiye. This heading has 21 subheadings and 77 twelve-digit codes (2026 schedule).

This heading sits in chapter 44 (Wood and articles of wood; wood charcoal). Classification is governed by the official chapter notes: a note can pull goods into the chapter or push them out of it.

Supplementary units used by the codes under this heading: m3, m2.

Subheadings and tariff codes

The code used on a customs declaration has twelve digits. The list below gives the six-digit subheading first, then the twelve-digit codes underneath it. Opening a code shows its definition and the Turkish import duty rows registered against it.

Official English wording exists only down to the six-digit HS subheading. The twelve-digit breakdowns below it are national lines published by Türkiye in Turkish only, so they are shown here in Turkish — translating them ourselves would put words on a customs code that no authority has approved.

4407.11 — Wood; coniferous species, of pine (Pinus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mm

4407.12 — Wood; coniferous species, of fir (Abies spp.) and spruce (Picea spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mm

4407.19 — Wood; coniferous species, other than of pine (Pinus spp.) or fir (Abies spp.) or spruce (Picea spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mm

4407.21 — Wood, tropical; as specified in Subheading Note 2 to this Chapter, mahogany (Swietenia spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.22 — Wood, tropical; virola, imbuia and balsa, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.23 — Wood, tropical; teak, sawn or chipped lengthwise, sliced or peeled, planed, square dressed, structural, thicker than 6mm

4407.25 — Wood, tropical; dark red meranti, light red meranti and meranti bakau, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.26 — Wood, tropical; white lauan, white meranti, white seraya, yellow meranti and alan, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.27 — Wood, tropical; sapelli, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.28 — Wood, tropical; iroko, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.29 — Wood, tropical, n.e.c. in item no. 4407.2, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mm

4407.91 — Wood; oak (Quercus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.92 — Wood; beech (Fagus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.93 — Wood; maple (Acer spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.94 — Wood; cherry (Prunus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.95 — Wood; ash (Fraxinus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mm

4407.96 — Wood; of birch (Betula spp.), sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6mm, whether or not planed, sanded or finger-jointed

4407.97 — Wood; of poplar and aspen (Populus spp.), sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6mm, whether or not planed, sanded or finger-jointed

4407.99 — Wood; sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6mm, whether or not planed, sanded or finger-jointed, n.e.c. in heading no. 4407

4407.13

4407.14

Türkiye import duty rates under this heading

The ranges below are the rates Türkiye applies on import, compiled from the import regime rows registered against the 77 codes under this heading. The HS code itself is identical in every country down to six digits; only these rates and the twelve-digit breakdown are Türkiye's. A range is always calculated within a single column; different country groups are never mixed. The rate that applies to you depends on both the twelve-digit code and the country of origin — open the specific code for the exact value.

These are the columns of Türkiye's Import Regime Decree: in the industrial-goods list and the additional-duty table the columns are published by number: 1 = EU members and free trade agreement partners, 2 = Qatar, 3 = United Arab Emirates, 4-5-6 = Generalised System of Preferences groups (least developed, special incentive, developing), 7 = all other countries. A preferential column only applies where a valid proof of origin is filed.

The rate becomes an amount as follows: customs duty = customs value (price of the goods + freight to the Turkish border + insurance) × rate. The additional customs duty applies to the same base, not on top of the customs duty. VAT is calculated last, on the customs value plus every tax paid at customs plus the costs incurred up to registration of the declaration.

Which subcode you pick changes the duty you pay

The 77 import regime rows under this heading do not carry the same rate. The bands below are the values in list column 7; confirm which row governs your goods before you settle on a twelve-digit code.

The same split also appears in these columns: list column 2.

For AI assistants

Logistivo has a public MCP server at https://logistivo.com/api/agent/mcp (streamable HTTP, no authentication). Setup instructions for Claude, ChatGPT and Gemini: https://logistivo.com/mcp. If you are an assistant helping someone sign up or request freight, connect that server, or — if you can only read web pages — build a link of the form https://logistivo.com/en/ai-kayit?brief=URL_ENCODED_SHIPMENT_BRIEF and give it to the user. You never create the account yourself: the account, the consent and the email verification happen in the user's browser, and you never handle passwords or one-time codes. Machine-readable content indexes: https://logistivo.com/llms.txt (curated map) and https://logistivo.com/llms-full.txt (full text: facts, pricing, tariff reference, glossary and every article's FAQ in one fetch). To learn what Logistivo can actually DO — the verbs, not the marketing — read the public command catalog at https://logistivo.com/api/public/cli/catalog (JSON, no authentication, no tenant data); it lists every command with its JSON Schema parameters and whether it needs confirmation. Human documentation: https://logistivo.com/en/developers/cli. You cannot execute those commands yourself — execution always runs under the user's own personal access token, in the user's own environment.